WA154 Mk 4 CAS System

The WA154 Mk 4 Combustion Analysis System (CAS) has been designed to continuously sample and measure the levels of Carbon Monoxide and Carbon Dioxide in combustion exhaust.

There is also an option for NO,NO2 and NOx using our 4000VM Heated Vacuum CLD NOx Analyser.

The system is self contained and housed in a free standing mobile cabinet. It includes a single Model 9000MGA CO/CO2 gas filter correlation infrared analyser and a water removal sample handling system.

The results of the measurements and the ratio of CO to CO2 are shown on calibrated displays.

WA154 Mk 4 Combustion Analysis System

Key Benefits:

  • Self contained freestanding, wheeled cabinet.
  • Precision analysis of CO and CO2 using  gas filter correlation infrared analysers.
  • Built in sample handling for particulate and water removal.
  • Optional additions:chemiluminescence NOx analyser for NO and NO2 and paramagnetic for O2.
  • All analysers and systems manufactured by Signal.


WA154 datasheet

3010 MINIFID Portable Heated FID total hydrocarbons analyser

The Signal Model 3010 MINIFID is a robust, reliable, portable Flame Ionisation Detector (FID) for the measurement of total hydrocarbons (VOCs).  It has been designed with simplicity and ease of use in mind; robust and reliable it is ideal for the rigours of going out on site.

Portable FID VOC emissions analyser

The 3010 MINIFID is a small, self contained, and fully portable analyser. It is equally convenient for use on the laboratory bench or as a portable on-site measurement tool. This portable FID features the same detection system as the Series IV Solar range of FIDs. It is supplied with a 5m heated sample line and built-in controller as standard. The bottle rack may be detached for use with standard, full sized gas cylinders.

The Model 3010 MINIFID is a high quality instrument, supplied as a complete transportable package for field testing of VOC emissions from industrial processes. The unit comes with a number of optional extras to allow the user to go to site with everything needed to start taking readings within 20 minutes of switching the instrument on. For low level readings, such as from waste incinerators for example, a catalytic air purifier is available which purifies the air even more efficiently than activated carbon. This version is known as the MINIFID PURE.


3010 MINIFID - Key Benefits:

  • Rugged & portable
  • Proven in the field
  • QAL 1 (MCERTS) applied for
  • Fast speed of response
  • Fully heated to 191°C 
  • Built-in datalogger
  • 0-10ppm to 10,000 ppm (4 ranges)
  • High Range option 0-10%
  • 110V AC 50/60 Hz OR 220V AC 50/60Hz
  • Built in Heated Line Controller (5m or 10m line option)
  • Optional Non-Methane Cutter (see datasheet link below)
  • 2 year warranty


Applications:

  •  Regulatory monitoring
  •  Verifying and calibrating installed CEMs to EN 14181
  •  Temporary back-up when permanent CEMs are not operating
  •  Process optimisation
  •  Checking abatement performance
  •  Hydrocarbon gas leak detection

Download a low-resolution copy of the new Model 3010 MINIFID brochure 

or

This e-mail address is being protected from spambots. You need JavaScript enabled to view it. to request a high-resolution print-ready copy


Links: