Signal Group establishes gas monitoring hire fleet
Responding to a demand for short-term monitoring, Signal Group has established a fleet of gas measurement instruments that are available for hire. “Some of our customers only need the equipment for a specific project or for a short-term investigation,” explains MD James Clements. “In these circumstances it would not be sensible to purchase the equipment, […]
Celebrating the life of a gas measurement industry icon
Loved and adored by his family and friends, much liked and admired by his peers, John Clements was a hugely popular man, and will be sadly missed by those that were lucky enough to have known him. John passed away after a short illness on 28th January 2023 at the age of 72, and will […]
Gas sample cooler/dryers stand the test of time
Signal Group is currently celebrating the 30th anniversary of its gas sample cooler/dryers. Over the years, Signal has developed a fleet of ancillary equipment to ensure the accuracy and reliability of its gas analysers, and this has included cooler/dryers that condition sample gas before analysis. Despite advances in technology, Signal Group has remained true to its guiding […]
SGS Germany – Gas Divider Testimonial
SGS, the world’s leading testing, inspection and certification company, has been using Signal Group 821S Gas Dividers at its laboratory near Munich in Germany since 1995. The instruments are used to create up to ten different calibration gas concentrations from a single calibration gas. This enables staff at the SGS laboratory to perform accurate, reliable […]
Gas analysers demonstrate Ecodesign compliance
For the last 20 years, Powrmatic a leading British manufacturer of HVAC equipment, has been using Signal Group analysers to check the regulatory compliance of its products, which include gas burning warm air heaters, radiant heaters and ventilation equipment. Powrmatic’s Engineering Manager, Dr Lee Herbert, says: “It’s incredible that the same analyser rack has delivered […]
Demonstrating environmental compliance for over 24 years
In order to demonstrate compliance with environmental regulations, LANXESS, a leading specialty chemicals company, has been using Signal Group Flame Ionisation detectors (FIDs) at its facility in Baxenden, UK, since 1998. The site manufactures and sells urethane prepolymers (conventional, in solvent and low free monomer), blocked isocyanates (in water or solvent), urethane foam systems and […]
AQE launch for next-gen certified FIDs
Signal Group, the UK developer and manufacturer of advanced gas analysis and calibration instrumentation, has submitted both portable and fixed VOC analysers for MCERTS certification, and the company’s stand (D11) at AQE 2022 will feature both instruments. The 3010 MINIFID rugged, portable, heated FID VOC analyser has been designed to demonstrate compliance by hydrocarbon […]
Researchers investigate ammonia fuel for marine decarbonisation
A group of academic and industrial partners have been awarded a £5.5million grant by the Engineering and Physical Sciences Research Council (EPSRC) to accelerate understanding, technologies and policies relating to the use of ammonia as a sustainable fuel. The project begins in June 2022 and will run for 5 years. Entitled ‘Decarbonised Clean Marine: Green […]
Did you know?
Our S4 units are capable of having all the flows, pressures and temperatures read and adjusted remotely via the internet. This together with the out of limit alarms may be messaged to Signal Group where the service department can check the readings and adjust the settings if necessary. All S4 gas analysers have digital signal […]
Rapid service assures environmental accreditation
In April 2022, Leeds based Alkali Environmental was awarded UKAS and MCERTS accreditation for its emissions testing services. However, just three weeks before the MCERTS audit, a vital piece of the company’s in-house instrumentation required urgent service and repair, so the company faced the very real prospect of having to defer the audit. “UKAS and […]
