Series IV PULSAR

Pulsar GFC NDIR + O2 Multigas

Gas Filter Correlation is the best type of Non Dispersive Infra-Red for combustion analysis. Instead of a dual beam sample cell and a seperate reference cell, this method uses only a single cell for both sample and reference.

This method reduces problems with cell contamination causing a difference in readings. Also, with Gas Filter Correlation we fill the filter wheel with our own proprietary gas mixtures to eliminate interference from other gases e.g. H2O or CO2 when measuring.  For example, ppm level CO is easily measurable in the presence of percent levels of these other gases.

Up to 5 gases can be measured using a single analyser.  We offer various configurations and options to suit many applications, including internal gas switching for automatic calibration, any combination of separate or combined sample inlets for all of the measurement channels, sample pumps, etc.

Our unique design means that we can cater for many combinations of gases.  Gases such as CO, CO2, NO, SO2, CH4, HCl and Ocan be included in many combinations of ranges, for example a 100ppm CO range can be used alongside 20% CO2, 1000ppm NO, 100ppm SO2 and 25% O2.

The PULSAR class also provides superior levels of linearity throughout the 10,000:1 range ratio.

Key Benefits:

 UP TO 5 CHANNELS

 LOW RANGES E.G. 0-10PPM CO

 FAST SPEED OF RESPONSE

 5 USER CONFIGURABLE RANGES PLUS AUTORANGE PER CHANNEL

 ELECTRONIC PRESSURE AND TEMPERATURE COMPENSATION

 RS232  'AK' PROTOCOL, 4-20mA & 0-10VDC CHART OUTPUTS

 FULL ETHERNET REMOTE DIAGNOSTICS AND CONTROL

 FREE OPEN SOURCE REMOTE SOFTWARE

 24VDC OR UNIVERSAL MAINS POWER SUPPLY

 UP TO TWENTY THREE CONFIGURABLE 1A CONTACT CLOSURE OUTPUTS

 2 YEAR WARRANTY

Applications:

 Environmental  compliance

  Gas Purity

 Combustion analysis

 Process monitoring

 Gas Turbine Emissions

 Automotive  Emissions

 Research

 CEMS

 OEM System Integration


PULSAR datasheet