Heated Line plus Temperature Controller

Product Description

Signal Group’s sample handling modules and components condition gas samples in preparation for analysis. 1/8”, ¼”, 3/8” and ½” versions, and their metric equivalents (3mm, 6mm, 10mm, 13mm). 1m to 50m in length. Signal Group’s Trace heated line is designed to convey hot exhaust gasses from sample points and probes to analyser, without compromising sample integrity. With safety a major consideration the tough, flexible line is electrically isolated from the main supply and is thermally insulated to allow handling even at full temperature.

Optional Configuration

Add to Quote

Signal Group’s sample handling modules and components condition gas samples in preparation for analysis. 1/8”, ¼”, 3/8” and ½” versions, and their metric equivalents (3mm, 6mm, 10mm, 13mm). 1m to 50m in length. Signal Group’s Trace heated line is designed to convey hot exhaust gasses from sample  points and probes  to analyser, without  compromising sample integrity. With safety a major consideration the tough, flexible line is electrically isolated from the main supply and is thermally insulated to allow handling even at full temperature.

Key Features

• Braided heating element eliminates cold spots

• Vital for accurate testing of heated samples containing soluble or condensing gases

• Heating up to 200℃

• Field repairable

Documentation

➔ Ancillary Equipment Brochure

➔ User Manual

Technical Specification

MATERIAL CONSTRUCTION: PFA braided tube, thermally insulated with silicone sponge and surrounded with wire reinforced PVC hosing. Continuous lengths of 100ft and more available.

HEATING ELEMENT: Flexible, stainless steel braiding. Heating up to 200℃

DIAMETER: 1/8in, 1/4in and 3/8in are standard in either normal thickness (0.04in) or heavy duty (0.06in). Other diameters are available on request.

CONTROLLER: Zero voltage switch type, all solid state, housed in standard 96x96mm panel mounted case. Proportional band for temperature stability.

TEMPERATURE STABILITY: ± 5℃

TRANSFORMER: Individually wound to voltage required.

POWER REQUIREMENTS: Approximately 90W/m